| Delphia Yachts Ireland | |
| Q1 Greenogue Business Park, Rathcoole, Co. Dublin, Ireland | |
| Contact: | Gavin Tobin |
| Telephone: | Reveal Telephone Number |
| Mobile: | Reveal Mobile Phone Number |
| Website: | Visit Company Website |
| View All Delphia Yachts Ireland Listings | |
Price, Contact & Location
| Status: | Available | |
| Price: | €128,500 Per Vessel | | |
| Tax Status: | Tax Not Paid | |
| Tax Information: | DELIVERY IS EXTRA PRICE DOES NOT INCLUDE VAT | |
| Contact: | Contact Advertiser | |
| Website: | Open website in new window |
Video
Description
The Delphia 40.3 is an oceangoing yacht built to RCD Category A, ensuring it meets the highest standard for performance and safety. The Delphia 40.3 is available in two, three and four cabin versions with all version featuring two heads compartments.
Below decks the Delphia 40.3 features a very spacious and bright saloon with room to accommodate the whole crew in comfort, a large fully equipped galley is common to all versions as is a navigation table.
The Delphia 40.3 has a wide and spacious cockpit that well laid out for sailing and is perfect for unwinding after a day's sailing. The teak cockpit features convenient aft access to the bathing platform which is also ideal for boarding when moored stern to.
The Delphia 40.3 is available with either a fixed keel or a swing keel, the fixed keel version is available as either deep or shallow draught, the yacht is also available with either dual or single steering positions.
Specifications
| Vessel type: | Cruising Yacht |
| Designer: | Andrzej Skrzat |
| Builder: | Delphia Yachts Kot |
| Make: | Delphia |
| Model: | 40.3 |
| Year constructed: | 2017 |
| Berths: | 9 |
| No. of engines: | 1 |
| Engine model: | Volvo Penta D2-40 |
| Engine power: | 38 |
| Fuel type: | Diesel |
| Length over all: | 12.35m |
| Beam: | 3.94m |
| Maximum draft: | 2.27m |
| Draft, keel down: | 1.95m |
| Draft, keel up: | 1.98m |
| Hull type: | Displacement |
| Keel type: | Fin Keel |
| Displacement: | 8600 kg |
| Fuel capacity: | 210 Litres |
| Water capacity: | 320 Litres |
| Holding tank capacity: | 47 Litres |
Engine(s)
The engine offered as standard with the Delphia 40.3 is the brand new Volvo Penta D2-40 sail-drive (photo features shaft drive version of same engine) and with a 210 litre fuel tank your cruising grounds can be far and wide.
As an option the standard 40hp engine may be upgraded to a 54hp Volvo Penta D2-55 sail drive for those that require more power.
A hot water installation is standard with both engines and a folding propeller is a additional cost optional extra.
On both engines oil dipstick, oil filter, fuel filter and water pump are located towards the front of the engine making all engine checks quick and simple. Both engines are fitted with a 115 Amp alternator as standard.
Accommodation
Accommodation on all 3 interior versions of the Delphia 40.3 is very good. Obviously the charter version has slightly less living space than the two owners version but only in the forward cabins. The charter version features a double cabin in the fore peak with a twin bunks then to port and a heads to starboard. On the owners version this whole are is part of the master cabin with a larger en-suite heads compartment to port and seating & storage to starboard. The two cabin owners version features a single aft cabin and an L shaped galley to the aft port side of the saloon.
On the 3-cabin version the two aft double cabins are identical in size and offer 2.1m of bunk length. The aft cabins on the 2 and 4 cabin versions of the Delphai 40.3 are indentical in size. Ventilation and daylight in both rear cabins is provided by a porthole leading to the cockpit and by a hatch in the ceiling.
Sails & Spars
The Delphia 40.3 is supplied as standard with a deck stepped C-section Seldén mast featuring two sets of spreaders. The standard half battened mainsail has an area of 36.50m2 and a fully battened mainsail with Seldén MDS cars is an option. The MDS cars make sail handling a dream preventing jamming when raising or lowering the mainsail. Lazy jacks and a stack pack are also available for either mainsail type.
An other option for the Delphia 40.3 is a Seldén Furling Mast and is available for quite a low cost when compared to a fully battened mainsail with a stack pack & lazy jacks. The furling mainsail features vertical battens that allow for positive roach. This is a fine combination for performance and convenience and is ideal for those sailing short handed.
A furling Genoa of 41.60m2 is standard on the on the Delphia 40.3 and it features anti-UV protection as standard. A 121.00m2 Spinnaker kit is also available.
Disclaimer
We have decided to price all our boats at the ex. factory price. This means that delivery & commissioning must be factored on top of the vessel price above and then the relevant VAT rate must be applied on top of the sum of these prices. GT Marine is registered for VAT in both the UK and Ireland to facilitate sales in to Northern Ireland and Republic of Ireland citizens.
For some of the larger vessels the possibility exists to have the boats delivered and commissioned/rigged in Gdansk so the customer can sail the boat home to Ireland or hire a delivery skipper etc.
Please call to discuss delivery & commissioning pricing.
Location Map
Note: Indicated location is approximate general area only.